Rohde & Schwarz HAMEG HMP4030 – Programmable Three-Channel Power Supply

HMP4000 front HMP4000 side

Key Facts

  • HMP4030: 3 × 0 V to 32 V/0 A to 10 A (384 W)
  • HMP4040: 4 × 0 V to 32 V/0 A to 10 A (384 W)
  • Low residual ripple due to linear postregulators
  • Realtime voltage, current and power values
  • High setting and readback resolution:
    1 mV and 0.1/0.2/1.0 A (depending on current and model)
  • FuseLink (electronic fuse) freely combinable for all channels
  • FuseDelay tunable up to 250 ms
  • EasyArb function directly programmable on device
  • PC software (free of charge) for easy generation of user-defined waveforms
  • Independently adjustable overvoltage protection (OVP) for each channel
  • Advanced parallel and serial operation via V/I tracking
  • Front connectors: 4 mm (0.16 in) safety sockets
  • Rear connectors for all channels, including sense
  • USB/RS-232 dual interface, remote control via SCPI-based commands

Models and Options

Models

  • HMP4030 Programmable Three Channel Power Supply
    Order No. 5800.2160.02
  • HMP4040 Programmable Four Channel Power Supply
    Order No. 5800.2177.02

Options

  • HO730 Dual Ethernet/USB Interface
    Order No. 3594.3677.02
    for HMF, HMO, HMP, HMS series
  • HO740 IEEE-488 (GPIB) Interface
    Order No. 3594.3683.02
    for HMF, HMO, HMP, HMS series

Accessories

  • HZ10B Silicon Test Lead
    Order No. 3594.3860.02
    banana to banana, 1 m (set of 5, blue)
  • HZ10R Silicon Test Lead
    Order No. 3594.3877.02
    banana to banana, 1 m (set of 5, red)
  • HZ10S Silicon Test Lead
    Order No. 3594.6301.02
    banana to banana, 1 m (set of 5, black)
  • HZ72 GPIB cable, 2 m, 90° angled, stackable
    Order No. 3594.4296.02
  • HZP91 19'' rackmount kit, 4 RU
    Order No. 5800.0939.02
    for HMP4030, HMP4040

Control Software

Pyrame

The HMP4030 seems to be compatible with the ps module.

Resources

Comments