Posts with the tag ARM

Arduino Due and the Atmel ATSAM3X8E

Pinout

Key parameters for ATSAM3X8E

Parameter Value
Flash (Kbytes): 512 Kbytes
Pin Count: 144
Max. Operating Frequency: 84 MHz
CPU: Cortex-M3
no. of Touch Channels: 32
Hardware QTouch Acquisition: No
Max I/O Pins: 103
Ext Interrupts: 103
Quadrature Decoder Channels: 2
USB Transceiver: 1
USB Speed: Hi-Speed
USB Interface: Host, Device
SPI: 4
TWI (I2C): 2
UART: 5
CAN: 2
LIN: 3
SSC: 1
Ethernet: 1
SD / eMMC: 1
Segment LCD: 0
Graphic LCD: No
Video Decoder: No
Camera Interface: No
ADC channels: 16
ADC Resolution (bits): 12
ADC Speed (ksps): 1000
Analog Comparators: 0
Resistive Touch Screen: No
DAC Channels: 2
DAC Resolution (bits): 12
Temp. Sensor: Yes
Crypto Engine: No
SRAM (Kbytes): 96
EEPROM (Bytes): 0
Self Program...

Read on

First Tests with UDOO Quad

Serial Communication from UDOO to builtin Arduino Due

http://www.udoo.org/forum/viewtopic.php?p=5631#p5631

stty -F /dev/ttymxc3 cs8 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke noflsh -ixon -crtscts

Specs for the UDOO Quad

Source: http://elinux.org/UDOO#UDOO_Quad

Freescale i.MX6Quad, 4 x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
GPU...

Read on

Raspberry Pi

Today my Raspberry Pi finally arrived! One of the projects I'm planning to use it for is out-of-band management for PCs.

This blog post will evolve as I'll discover interesting things to do with my RPi.

About the hardware:

Arch Linux Essentials

Here are some of the steps that are most essential...

Read on

Install ArchLinuxARM on the Seagate GoFlex Home

Attention! This is an advanced topic! Do not engage in any activity if you're not cool with the Linux command line and ready to do something to your GoFlex Home that Seagate did not...

Read on